Release Notes

Epic Eye 4.0.1 Release Notes

🔄 Upgrade Notes

  • This upgrade is supported from version 3.4.6 or later. The upgrade will fail if the current version is earlier than 3.4.6.

  • This upgrade contains substantial changes and may take longer than usual. After the upgrade, the system refreshes automatically and displays the new version number in the upper-left corner of the interface.

  • This version does not support Laser L or S-M Air cameras. It supports only Pixel series cameras, Laser L V2S, Log L, and Laser M V3.

  • This version requires Epic Pro or Atom version 1.4.0 or later. Versions earlier than 1.4.0 are not supported.

  • This version upgrades the MCU firmware of Laser L V2S and Log L cameras. The process takes longer than usual. When the interface prompts you to refresh manually after 500 seconds, wait for the firmware flashing process to finish.

⚡ Improvements

Prevented Unintended Downgrades from Later Versions

  • If the camera’s current version is later than the version in the upgrade package, the package is rejected to prevent an unintended downgrade.

  • Contact the R&D team if a downgrade is required.

Improved Upgrade Process Messages

  • When the camera does not have enough free disk space, the upgrade interface displays a clear message in Chinese, including the available and required space.

  • The firmware flashing wait message for Laser L V2S and Log L cameras has been adjusted to 500 seconds to match the actual flashing time and prevent users from refreshing early and mistakenly assuming the upgrade failed.

🔧 Bug Fixes

Fixed a Version Mismatch Between the Robot Library and the Epic Pro Robot Library

Fixed Out-of-Range Camera Parameters During an Upgrade

When upgrading from an earlier version, the system automatically checks saved parameter configurations and active parameters against their allowed ranges and corrects out-of-range values.

  • Covers parameters for structured light, swinging line scan, passive stereo, and video stream modes, as well as batch 3D parameters.

  • Prevents out-of-range values left by earlier versions from causing settings to fail or captures to behave abnormally. Parameters do not need to be checked individually after the upgrade.

Fixed Missing Image Rows When Auto Exposure Was Enabled on Pixel Series Color Cameras

Fixed Repeated Error 0x12 During Capture After Enabling Auto Exposure on Pixel Series Color Cameras

Fixed Pink Distortion in 2D Images from Pixel Series Color Cameras

Fixed the Manual Depth-Coloring Range Being Reset

  • Fixed an issue where taking another capture reset the maximum and minimum height to automatic values after switching depth coloring to manual mode and changing the height range.

  • The manually configured coloring range now remains unchanged during continuous capture.