Local Point Cloud Removal With Normals

Description

This operator is used to remove all points contained in another point cloud (local target point cloud) from a scene point cloud.

The operator employs a hash mapping method, where the coordinates of the model point cloud and the scene point cloud are mapped to hash values via a hash algorithm. Points with similar coordinates will receive the same hash value, and overlapping points are quickly removed by comparing these hash values.

Overview

Removes specified local target point clouds from the scene point cloud.

Scenarios

Removing specific parts of a point cloud: After extracting a local point cloud of interest using other operators, or when a part of the point cloud is a known interference area, this operator can be used to remove that part from the original scene to facilitate the processing of the remaining scene point cloud.

Inputs and Outputs

Inputs

Local target point cloud: The target point cloud with normals to be removed from the scene, in the same coordinate system as the scene point cloud.

Scene Point Cloud: The complete scene point cloud from which the local target point cloud will be removed.

Outputs

Remaining point cloud: The remaining point cloud data after processing.

Parameters

Voxel Step

Description

The edge length of the voxel (small cube) used to match overlapping points.

Tuning Instructions

  • Increase this value: The voxel grid becomes larger. Even if two points are at a certain distance, they may be considered overlapping points and removed, which may cause the removal range to be larger than the actual boundary of the target point cloud.

  • Decrease this value: The voxel grid becomes smaller, and the matching conditions become stricter. Only very close points will be removed. This makes the removal range more precise, but some points that should be removed might be missed due to point cloud noise or tiny deviations.

Parameter Range

[1, 10000], Default value: 15, Unit: mm

Parameter Range

Values/Range: [1, 10000]

Default: 15

Unit: mm

Merge Input Point Clouds

Description

When the input scene point cloud is a list of point clouds, controls whether to merge them into a single point cloud before processing.

Tuning Instructions

  • Disabled (Default): Processes each point cloud in the input list individually and outputs a result list.

  • Enabled: Merges all input point clouds into one, then performs the removal operation once.

Parameter Range

Default: False

Invert Removal

Description

Inverts the logic of the operator’s point cloud removal.

Tuning Instructions

  • Disabled (Default): Normal mode — removes the point cloud that matches the model from the scene.

  • Enabled: Reverse mode — keeps the point cloud that matches the model in the scene and removes everything else, equivalent to "cutting out" the matched object from the scene.

Parameter Range

Default: False