Point Cloud Downsampling

Description

Downsampling reduces the density of the point cloud while preserving its original shape features as much as possible, thereby reducing the computational load of subsequent processing.

Overview

Reduces point cloud density while preserving shape features, thereby decreasing subsequent computational load and improving processing efficiency.

Scenarios

  • Improve processing efficiency: Reduce the number of points through downsampling before performing time-consuming operations (such as matching, segmentation, feature extraction) to speed up calculation.

  • Save memory: Reduce the storage space and memory occupied by point cloud data.

Inputs and Outputs

Inputs

Point Cloud: The input point cloud or list of point clouds to be downsampled.

Outputs

Downsampled point cloud: The list of point clouds obtained after downsampling.

Parameters

Method

Description

Select the algorithm used to perform downsampling.

Tuning Instructions

Uniform Downsampling (Default): Creates cubes (voxels) of the specified size in 3D space, and for each voxel containing at least one point, selects the original point closest to the voxel center as the output.

Voxel Downsampling: Also creates voxels of the specified size, but computes the centroid (average coordinates) of all points within each non-empty voxel and uses that centroid as the output point. This method better preserves the overall shape and center of mass of the point cloud; the output point positions are computed values, not necessarily original points.

Which method to choose depends on the specific scenario: if you want the output points to be a subset of the original points and evenly distributed, choose Uniform Downsampling; if you want the downsampling result to favor smoothness and stability, and don’t require the output point positions to come strictly from the original points, choose Voxel Downsampling.

Parameter Range

Values/Range:

  • Uniform Downsampling

  • Voxel Grid Downsampling

Default: Uniform Downsampling

Voxel Size

Description

Defines the edge length of the voxel used during downsampling; this parameter is used by both the Uniform Downsampling and Voxel Downsampling methods.

Tuning Instructions

A key parameter controlling the degree of downsampling, which needs to be adjusted according to the density and size of the original point cloud and the expected downsampling rate.

  • Increase this value: The voxel becomes larger, and each voxel may contain more points. The final number of output points will be smaller, the degree of downsampling higher, and detail loss may be greater.

  • Decrease this value: The voxel becomes smaller, the number of output points will be larger, the degree of downsampling reduces, preserving more details, but the calculation load and data volume will increase.

Parameter Range

[0.01, 500], Default value: 3, Unit: mm

Voxel Size=1mm (High Density)

Voxel Size=3mm (Default)

Voxel Size=10mm (Low Density)

Parameter Range

Values/Range: [0.01, 500]

Default: 3

Enable Node

Description

Controls whether this operator executes its computation.

Tuning Instructions

Enabled (Default): Runs the operator function normally.

Disabled: The operator performs no operation and directly outputs the input data.

Parameter Range

Default: True