Point Cloud Smoothing

Description

Smooths organized point clouds, effectively preserving edge information while smoothing surfaces (removing noise), unlike ordinary Gaussian blur which rounds edges.

Overview

Performs noise reduction on point clouds while smoothing surfaces and preserving object edge features.

Scenarios

  • Surface Noise Removal: Eliminates ripples or random noise generated during depth camera imaging, making surfaces flatter.

  • Edge-Preserving Preprocessing: Smooths data before segmentation or measurement without destroying key geometric contours of objects.

  • Improving Matching Quality: Smoothed point clouds yield more accurate normal vector calculations, aiding subsequent 3D matching.

Inputs and Outputs

Inputs

Organized point cloud: Organized point cloud data that maintains the 2D structure of camera imaging.

Outputs

Filtered point cloud: The point cloud after smoothing processing, maintaining the same structure and type as the input.

Parameters

Advanced Parameters

Description

Toggle between Simple Mode and Expert Mode.

Tuning Instructions

  • Disabled (Default): Uses the "Smoothing Level" parameter to quickly adjust the effect via a preset configuration.

  • Enabled: Exposes the "Filter Diameter", "Point Cloud Value Space Standard Deviation", and "Pixel Position Space Standard Deviation" parameters for finer-grained control.

Parameter Range

Default: False

Filter Diameter

Description

Defines the neighborhood size for the filtering operation, i.e., how large a range of surrounding points to reference when calculating the new depth value of the current point.

Tuning Instructions

  • Larger value: More points are referenced, resulting in a smoother filtering effect, but the calculation load increases exponentially, slowing down processing.

  • Smaller value: The filtering range is limited, retaining more local details, and it is faster.

Parameter Range

[0, 800], Default value: 10

Parameter Range

Values/Range: [0.0, 800.0]

Default: 10.0

Point Cloud Value Space Standard Deviation

Description

Sets the depth-difference threshold for the filter, i.e., how large a depth difference will stop the smoothing.

  • If the depth difference between two adjacent points is smaller than this value, the filter considers them to belong to the same plane or surface.

  • If the depth difference between two adjacent points is larger than this value, the filter considers them to belong to different objects and will not average them together.

Tuning Instructions

  • The smaller the value, the stricter it is. Only points with almost identical depths will be smoothed. This better preserves edge details and keeps object contours very clear, but denoising capability becomes weaker.

  • The larger the value, the looser it is. Even points with some depth differences will be used for smoothing. Denoising capability is strong, and surfaces become very smooth, but this also leads to the loss of more details.

Parameter Range

[1, 1000], Default value: 10

Parameter Range

Values/Range: [1, 1000]

Default: 10

Pixel Position Space Standard Deviation

Description

Sets the physical-range weight that controls smoothing: points closer to the center pixel receive a larger weight, and points farther from the center pixel receive a smaller weight.

Tuning Instructions

  • Larger value: Distant points will also have a significant impact on the current point, resulting in a broader smoothing effect.

  • Smaller value: Only very immediate adjacent pixels will affect the current point, limiting the smoothing action to a tiny area.

Parameter Range

[1, 1000], Default value: 10

Parameter Range

Values/Range: [1, 1000]

Default: 10

Smoothing Level

Description

Provides preset smoothing intensity levels.

Tuning Instructions

Provides six levels from 1 to 6. The higher the level, the stronger the denoising effect and the smoother the surface, but the calculation time will increase accordingly.

Parameter Range

[1, 6], Default value: 3

Parameter Range

Values/Range:

  • 1

  • 2

  • 3

  • 4

  • 5

  • 6

Default: 3

Enable Node

Description

Controls whether the operator performs the operation.

Tuning Instructions

  • Enabled (Default): Runs the operator function normally.

  • Disabled: The operator performs no operation and directly outputs the input data.

Parameter Range

Default: True