Point Cloud Edge Detection (X/Y-Axis Scan)

Description

This operator extracts the outer contour edge points of the input point cloud on the XOY plane using a "scan line" method. It first determines the range of the point cloud on the X and Y axes, then divides the X-axis range into several intervals based on the set "Resolution" parameter, finding the points with the maximum and minimum Y coordinates within each interval. Similarly, it divides the Y-axis range into intervals and finds the points with the maximum and minimum X coordinates within each interval. Finally, it merges all these found maximum/minimum points as the extracted edge point cloud.

This method is mainly used to extract the outermost contour of the point cloud projected on the XOY plane, and is particularly suitable for cases where the point cloud shape approximates a plane and its main projection plane is close to the XOY plane.

Overview

Extracts the outermost contour of a point cloud with an approximately planar shape projected onto the XOY plane.

Scenarios

  • Extract Plane Contour: Acquire the outer boundary of flat objects (such as plates, parts) on the XOY plane.

  • Obtain 2D Envelope: Get the approximate envelope range of the point cloud on the 2D plane.

  • Simplify Edge Representation: For application scenarios where the internal structure is complex but only the outer contour is needed.

Inputs and Outputs

Inputs

Point Cloud: The input point cloud or list of point clouds.

Outputs

Point cloud edges: A list of point clouds composed of the extracted edge points.

Parameters

Resolution

Description

  • Increase this value: Divides the X-axis and Y-axis ranges into more and smaller intervals. The scan becomes denser, and the extracted edge points will also be denser, capable of depicting contour details more finely, but the calculation load will increase.

  • Decrease this value: Intervals become larger, the scan becomes coarser, and the extracted edge points will be sparser, potentially missing some contour details, but the calculation speed is faster.

This needs to be adjusted according to the point cloud size, shape complexity, and expected edge point density.

Parameter Range

[0, 1000], Default value: 100

Parameter Range

Values/Range: [0, 1000]

Default: 100

Enable Node

Description

Controls whether this operator executes its computation.

Tuning Instructions

  • Enabled (Default): Runs the operator function normally.

  • Disabled: The operator performs no operation and directly outputs the input data.

Parameter Range

Default: True